Trang chủ > Oil Grabber™ Model 8
December 16, 2018

Oil Grabber™ Model 8

Oil Grabber Model 8 is a dependable and effective means of removing free floating oil from water and water-base solutions. In some cases, skimming by itself will reduce oil to an acceptable level of water purity. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems

Description

  • Oil Removal: 32 gph (120 lph) with standard tail pulley. 40 gph
  • Rate: (150 lph) with high capacity tail pulley. (Removal rate is based on 30 weight oil in water at ambient temperature.)
  • Tail Pulley: Specify standard or high capacity. (The high capacity option uses a patented pulley design that improves the adherence of oil to the inside of the belt, thus increasing the removal rate.)
  • Motor: Fractional hp, TEFC, gear motor operating on either 115/230VAC, single phase, 60Hz or 230/460 VAC, three phase, 60Hz. Optional: 50Hz power source; explosion proof; drip proof; pneumatic; and wash down duty motors.
  • Belt Width: 8 in. (20 cm).
  • Belt Length: User specified.
  • Belt: Specify corrosion-resistant steel, carbon steel, or
  • Material: specially engineered poly.
  • Wiper: Nitrile (Standard); CRV (Optional) or Ceramic hybrid (Optional). Specify wiper material based on temperature and fluid compatibility.
  • Weights: Drive assembly and housing with motor, without belt or tail pulley: 82 lbs. (37 kg) max. Standard tail pulley: 10 lbs. (4.5 kg). Optional high capacity tail pulley: 8 lbs. (3.6 kg) 4 ft. corrosion-resistant steel belt: 7 lbs.(3.2 kg) (belt weight varies according to actual length specified)

Features & Benefits

  • Requires only a small area in the tank or sump
  • Easy mounting
  • High temperature capability
  • Chip resistant powder finish
  • Hazardous duty and food grade options
  • Custom designs and turnkey systems available
  • Fast cleaning with minimal maintenance
  • Most inexpensive way to remove oil from water
  • Saves coolants by removing tramp oil
  • Conserves parts wash water by removing oily wastes
  • Prevents plugging of spray heads and filters
  • Reduces fluid disposal costs
  • Skimmed oil can be recycled and reused as a lubricant or fuel
  • Helps meet government requirements for water discharge

Typical applications

  • Wastewater sumps
  • Parts washers
  • Coolant systems
  • Heat treating fluids
  • Food processing plants
  • Parking lots, garages, and service facilities
  • Outdoor ponds, lakes, and basins
  • Underground tanks
  • Ships’ bilges
  • Aircraft service areas and tarmac runoff
  • Truck, locomotive, and other mobile equipment washing facilities
(Visited 9 times, 1 visits today)

Video

    Leave a comment

Related Post

April 16, 2018
Oil Spill Kills More Than 2,400 Animals

An unclear amount of oil has leaked into Colombia’s waterways, and environmental activists are saying an oil company is to blame. At the beginning of March, an oil well in northern Colombia burst, spewing an unclear amount of oil into the Magdalena River, a principal waterway that flows about 950 miles northward through the western half of the […]

April 16, 2018
Operational discharge of oil

Ships | Offshore drilling | Pipelines Discharges of oil from shipping, offshore extraction of oil, and transport of oil in pipelines is the result of either accidents or “normal”, deliberate operational discharges. Accidental discharges (oil spills)occur when vessels collide or come in distress at sea (engine breakdown, fire, explosion) and break open, or run aground close to the shore, or when […]

April 16, 2018
Oil spills

Oil spills can come from a number of sources, including tankers and oil extraction and storage facilities. Spills from tankers are usually the result of a breach in the hull, either from running aground or hitting an object in the water. Major oil spills, such as the 2006 spill off the coast of Lebanon or […]